Home Buy Here Videos Blog Instructions Contact FAQ


 

Round kitchen island with Curvomatic

"The Curvomatic works really well by the way - here is a photo of a round kitchen island we made using the system"

Dougal Black
dougalblack.co.uk


Vacuum Press with Curvomatic

These images of Curvomatic being used in a vacuum frame press, come from one of our customers who wants to remain anonymous for business reasons.

The molds are constructed on longitudinal beams with halving joints to hold the formers. You can see all of the different mold formers stored easily under the press. No plates have been used to cover the ends of the extrusion as masking off the ends seems to work fine with the rubber sheet. A 3mm cover sheet for the mold is being used in this system to prevent lines from the extrusions marking the work.


Vacuum press with CurvomaticVacuum press with CurvomaticVacuum press with Curvomatic

Vacuum press with CurvomaticVacuum press with CurvomaticVacuum press with Curvomatic


Next Front - România


"We've had a few orders for curved MDF and we're happy to tell you the system worked like a charm.
It was a matter of selecting the right adhesive and thickness of the sheets. The curved panels are quite strong, I've even placed 300+ pounds of weight on top of 720x550 mm panel without having to deal with any consequences. Once painted, they looked really nice and the customers are satisfied. I'd like to express my own satisfaction regarding your product and thank you for your support.
This spring we'll place an order for another kit, probably an 800x600 one.
I've attached some pictures of the finished product."

Adrian SIMIONESCU | Director
www.nextfront.ro

Curved doors with CurvomaticCurved doors with CurvomaticCurved doors with Curvomatic

Curved doors with Curvomatic

Curved doors with Curvomatic Curved doors with Curvomatic






Korte - Solid acrylic surface fabricators

Large curves with CurvomaticAndris Pukitis of Korte tells us about how he feels that Curvomatic has helped him and the business.

"We are very glad that we found this easy molding system.

1. It helps us save time: previous making some molds its take a time aprox. 4 hr now 45min We make them lot.

2. Easy storage in previous we made a molds and then, after job we throw out. Now any molds takes only 4 cm in thickness and we can easy storage and make a molds library.

3. The mold is made from aluminum, it is a very good heat conductor, it mean that warm detail cooling is faster than in wooden molds. When we made repeating details in previous we calculate 1.5-3 hr for cooling detail and, this time, all time grows, because molds is warming up now it is all time, same time 45 min.

Thanks for inventing so good system for molds."

Best regards
Andris Pukitis
Director

www.korte.lv






Latvian Curved Doors

We've had some great photos from Ainars Kivulis from Kesa Interiors & Joinery in Latvia who has been using Curvomatic to curve doors.
The first project to show that even shallow curves can be achieved with great results!

"I'm sending you some pictures after the finished work because, just to show you how good is your Curvomatic is. Its really good,
I cant even imagine how I would make two massive veneered oak commodes without it.Its very simple, but unique."

Take a look at the website for more in depth look at their work: www.kesa.lv










urvomatic in Woodworking Magazine
Review - British Woodworking Magazine

BIG Thanks to British Woodworking Magazine!

John Lloyd explores Curvomatic in this month's British Woodworking Magazine.
They have published a great two page article about Curvomatic.
Take a look below...



urvomatic in Woodworking Magazine

urvomatic in Woodworking Magazine




Speaker Cabinets in Dallas, Texas

AV Science Forum's user 'Passing Interest' has been using Curvomatic to design and build curved panels for a set of speakers he has made. Head over to the AVS forum and take a look at his awesome thread with plenty of photos from the former design right through to the end with the use of Curvomatic. http://www.avsforum.com/avs-vb/showthread.php?t=1362170&page=2
We've been blown away with the final out come of the speaker system. It really is great to see such craftsmanship!


Making speakers with CurvomaticMaking speakers with Curvomatic

Speaker Cabinets in Dallas, TexasSpeaker Cabinets in Dallas, Texas









Lewis & Hill KitchensLewis & Hill Kitchens

"We have been using the Curvomatic system for the manufacture of our curved cabinet doors and panels, and have found it to be an extremely accurate, quick and easy to use method of making formers for curved components.

It has proved to be extremely versatile and saved us considerable costs as the system is reusable. Materials, waste and dust are minimal compared to the traditional method of making laminated MDF formers,added to which is the benefit of lower labour costs with this much quicker system. I would highly recommend this product."

Simon Lewis
Director
Lewis&Hill Ltd
www.lewisandhill.co.uk





Carpow LogboatCarpow Logboat

3000 year old solid oak bending at almost 90 degrees.

The National Museums of Scotland have been working on the excavation, recovery and conservation of a 3,000 year old Carpow Logboat. They have used Curvomatic to build formers to reshape a Neolithic oak logboat that was found waterlogged on the Tay estuary.

"Here are some workshop photo’s of some of the bending in action.The logboat has to be heated with industrial heating blankets , we get the wood up to core temperature of about 70-80 degress c, remove the blankets and apply the curvomatic former.

Carpow LogboatIt has worked really well and the beauty is that we can remake the formers very quickly to suit the areas which we wanted to bend. It is really strong and robust and we have managed to some really tight bends. One gunwhale of the boat (top right) has had to bent almost 90 degrees, previously this was almost a flat piece"

Charles Stable, National Museums of Scotland






Niche Designs

The creators of Curvomatic.

"We developed this system due to the large number of Bagpress molds that we were having to make and then store. Curvomatic molds can be constructed in 10 to 15 minutes and the formers can be stored easily if you wish to keep them at all. We never expected that the system would actually work to a higher standard than all the other systems that we have used. The accuracy and strength of the Curvomatic mold is unparalleled by any other non CNC method and the lamination system works 100% of the time with a mere scraping of glue. The running cost of the system is practically nothing once you have purchased it as the extrusions are extremely durable."



Home | Product | Videos | Projects | Store | Shipping | Instructions | Buyers Guide | Contact | F.A.Q.

US Patent Pending 14/002,769 - UK Patent GB2503831 - International pending PCT/GB2012/050476

© Curvomatic Ltd. 2017 All rights reserved.




Home
| Buy Here | Videos | Blog | Shipping | Contact | F.A.Q.


US Patent: US 10, 107, 329 B2 - UK Patent: GB2503831 - International pending PCT/GB2012/050476
© Curvomatic Ltd. All rights reserved.


S 7