Home Buy Here Videos Blog Instructions Contact FAQ


Variable Length Kits

Special Offer Modular Kit
£1665 + VAT


A great all round kit for all bespoke cabinet makers and joiners. As it is modular, this kit can also be added to if you do want go bigger.
To make longer panels requires more beams but you can use wooden ones.
Maximum panel size with 3 beams is 1220mm x1220mm Makes any 1220mm long, 90° bend down to 40mm radius.

Kit comprises:

3 off 185mm modules
1 off joining kit
2 off small radius modules
3 off beam sets with ratchets

 

Buy Now


Modular Double Hollow

This is our recommended kit for most cabinet makers and joiners, where the ability to make a wide range of shapes and sizes is required.

You can start off with one module and a joining kit and simply buy extra modules when the need for a larger kit arises. These kits are made from 2' and 6" lengths of the 18mm extrusion and can make a variety of different length and width panels.

These short lengths are held together with a joining kit into lengths of 2', 4', 6', 8' and 10'.


 
The ends of the 2' lengths that form the main body of the kits all sit directly onto the formers where they are joined together and as a result panels made in this way are just as straight as panels made in the fixed length kits.

3 Modules + 1 Joining Kit

This kit comprises of:

78 lengths of 18mm Curvomatic x 2’ (610mm)
6 lengths of 18mm Curvomatic x 4' (1220mm)
6 lengths of 18mm Curvomatic x 6' (1830mm)
264 lengths of 18mm Curvomatic x 6” (152.5mm)
Screws included

£1164

 



 
Curvomatic Pressing

Curvomatic is a modular structural sheet material, constructed by sliding together longitudinally hinging aluminium extrusions. The extrusions join with each other without limit to produce a flexible aluminium skin 35mm thick with a minimum radius of 40mm. This skin when screwed to curved formers, creates an incredibly rigid curved surface that can be used to form other materials to a very high level of accuracy.



Advantages of Curvomatic?

Molds made in minutes.
Re-configurable in length and width.
Uses 90% less materials.
Molds made in minutes.
Permiable surface.
Very fast curing.
100% Re-usable.
Stores flat.
Top quality results every time.
As accurate as CNC cut molds.



Born from the need to make curved molds without the usual expense and waste. Curvomatic uses a fraction of the materials and time involved with the more traditional techniques. This is not however at the expense of quality! Curvomatic extrusions will last a lifetime all the while giving superior results to most other methods.



Curvomatic can be used to make one or two sided moulds depending on the application.
Pretty much any shape is achievable with a little creative clamping!


We sell both variable length, modular kits for bespoke work as well as fixed length kits for regular work.

All the systems shown on this page were made with 3 modules of our variable length, modular system with the addition of some of our smaller radius extrusions.

Big panels are not a problem! Molds can be made quickly even for the largest work and then stored
flat rather than taking up huge amounts of valuable workshop space.



We sell both long and short handled 5000Kg ratchet sets. The long handled versions are great for heavyduty work.

No need to rely on expensive and poor quality flexible plywoods. Curvomatic presses can form anything that will bend, being able to apply many times atmospheric pressure without damage. The image on the right shows 4 layers of 6mm Birch plywood being laminated to a 700mm radius.


Curvomatic extrusised with wooden beams.




All the kits on our website are double hollow which is to say that there are two gaps in the centre sections. The kits can all be reconfigured with one or no gaps when nessesary. This will ofcoarse reduce the working width. Single hollow ( one gap) and solid kits ( no gaps) are available upon request but are only nessesary if you are applying a thin surface veneer as part of a lamination.

The kits are constructed from our 18mm extrusion and will make moulds down to 185mm radius. For tighter radius sections you simply slide in the smaller radius extrusions where required.

Curvomatic moulds use at least 90% less materials than other traditional methods of mould construction so If you are looking for green credentials for your manufacturing equipment then this is deffinately the system for you.


This is our recommended kit for most cabinet makers and joiners, where the ability to make a wide range of shapes and sizes is required.

You can start off with one module and a joining kit and simply buy extra modules when the need for a larger kit arises. These kits are made from 2' and 6" lengths of the 18mm extrusion and can make a variety of different length and width panels.

These short lengths are held together with a joining kit into lengths of 2', 4', 6', 8' and 10'.

The ends of the 2' lengths that form the main body of the kits all sit directly onto the formers where they are joined together and as a result panels made in this way are just as straight as panels made in the fixed length kits.
csascasc


Home
| Buy Here | Videos | Blog | Shipping | Contact | F.A.Q.


US Patent: US 10, 107, 329 B2 - UK Patent: GB2503831 - International pending PCT/GB2012/050476
© Curvomatic Ltd. All rights reserved.